Mama Bright Color Doodle Dalmatian Dots DTF Transfer Ready For Press, Direct To Film, Transfer For Shirts, Tshirt Transfers, Mom Transfers

Print Sizes:
Adult will be printed at 11" wide or up to 13" tall for more narrow designs
Youth will be printed at 10" wide or up to 10" tall for more narrow designs
Toddler will be printed at 8" wide or up to 8" tall for more narrow designs
Infant will be printed at 6" wide or up to 8" tall depending on design
Large Pocket will be printed at 5" wide or up to 5" tall
Small Pocket will be printed at 3" wide or up to 3" tall

Note: You must have an actual heat press where you can adjust the pressure.  Avoid using presses like VEVOR, an Autopress - like the Cricut Autopress and HTVRONT, Handpresses - like Cricut Easy Press, and household irons -- none of these will apply enough pressure needed for DTF Transfers.
*CONTACT US FOR HELP*
Each heat-press is unique. We're sharing our own usage-based general instructions for our apparel business and press. If you require any help or need further info, feel free to message us directly at info@flawlesstransfers.com.  Please include your heat press information so we can look up the specs.

Matte Film Pressing Instructions:
HOT PEEL
For Cotton: Press at 300° F - High Pressure
For Polyester: Press at 285° F – High Pressure
1st press: 20 - 25 seconds
2nd press: 5 - 12 seconds
*suggested settings, results may vary*
1) Place garment on heat press and
transfer onto garment with image (right reading) facing up.  DO NOT USE A COVER SHEET.
2) Press at suggested temp, pressure and time based on your type of garment.
3) Quickly peel film off by the corner with the thickest part of the design
4) Cover design with parchment paper
or Teflon sheet for the 2nd press

Glitter Film Pressing Instructions:
COLD PEEL
Temp: 300° F
Pressure: HEAVY
1st press: 15 - 25 seconds
2nd press: 5 - 12 seconds
*suggested settings, results may vary*
1) Place garment on heat press and
transfer onto garment with image (right reading) facing up.  DO NOT USE A COVER SHEET.
2) Press at suggested temp, pressure and time.
3) Let the film cool completely before peeling.
4) Cover design with parchment paper
or Teflon sheet for the 2nd press

NOTE: If your transfer is not sticking, you need to increase your pressure setting.  If it's at the highest, then follow these troubleshooting instructions:
*Too much heat can damage your garment and transfer*
A) Add 5-10 seconds of time.  Increase 5-10 seconds at a time.  Up to 40 seconds.  If that doesn't work then try
B) Decreasing your heat with 15° F increments.  But do not go under 280° F.
You cannot damage your transfers with multiple presses.

Here is a video of us pressing a transfer to help: photos.app.goo.gl/jDy1XEJByVe1Ej5f6

As always, you can contact us directly with further troubleshooting: info@flawlesstransfers.com

Our DTF Transfers can be applied to virtually any garment:
Combed Cotton
Ring Spun Cotton
Organic Cotton
Polyesters
Blended Fabrics
Poly-Cottons
Tri-Blends
Polyester-Spandex